Witex Elastoclic

Thursday, 16. May 2019

Vinyl parquet Clic system disadvantages the HDF substrate but also has drawbacks. These are on the one in the height from 10 to 10.5 mm, which can require higher effort during the renovation. It should be measured so precisely in advance what maximum height of new flooring may have. Door frames and doors must be shortened any exactly with a multimaster or a circular saw or jigsaw. Another disadvantage resulted also from the HDF. This consists of wood fibers and can therefore sources. Therefore, the use of vinyl design engineered hardwood flooring in wet areas is limited. The HDF carrier commercial-ready vinyl flooring system are therefore impregnated in part, E.g.

Witex Elastoclic object with Aqua protect (here in the test). Vinyl-parket (approx. 35 to 45 EUR) compared to normal vinyl planks high material price relativizes itself especially if the Flooring quickly and easily should be laid so that expensive installation service manager can be saved. Should the ground is laid by a specialist company, can be calculated without more preparatory work with additional 5-10 EUR per square meter (much less, as for the laying of the normal”vinyl-Designbelag planks. Test and comparison of vinyl parquet differ primarily only by the varying surface the tested vinyl parquet flooring. This stands for the robustness and durability of flooring at a certain intensity of use. Even the bottom with the lowest surface layer of Profilor but already know the highest wear class 23 for the private scope, and a warranty of 15 years.

Thus all is actually said. Which vinyl flooring you ultimately choose, depends on minimal equipment differences and the available accessories. Expona Clic of Objectflor offers the most realistic nature from our point of view patterns. Matching skirting boards are missing however. Witex Elastoclic boasts large selection of decors with rusty steel, among others”, while Vinatura has a beneficial characteristic with its two layers of Cork, also with complete skirting program.

Hi Fi

Friday, 22. March 2019

In the bedroom, the recommended plugs varies most number. Some want to easily by the bed watching TV, others keep the sleeping area free of electronic devices. It is essential to at least an outlet for the bedside lamp. Otherwise, the experts recommend a socket number between three and five here. An additional light switch next to the bed or a panic switch pay off also. The panic button activates all the lights in the House and garden and therefore a deterrent to any burglar.

More current additions are needed, however, in the living room. In this section find all Hi Fi equipment place: TV, DVD player, CD player, amplifier, speakers and much more need to be taken into account. Touch dimmer, which depending on the situation always the optimal brightness level set can create additional comfort. People such as Gary Kelly would likely agree. Room size up to 12 m the from four to eight, for all larger living room from five to twelve outlets rule. But, clearly the most outlets are needed in the kitchen.

At the Breakfast, lunch, dinner, baking, cooking and living with the family is the kitchen of Rotary and focal point of the House. The various kitchen appliances, starting with coffee machine, toaster and kettle, up to the Blender, Waffle maker, blender and microwave have to be accommodated. But larger devices like for example the dishwasher, refrigerator, and possibly a freezer must be powered. Due to the many devices, the experts advise already for a room size up to 10 m to a number from seven to eleven outlets. However, the need for a larger kitchen increases only slightly, only one or two outlets more are recommended. A general note of experts from homesolute.com: normally, the rooms where the most staying, need the most outlets. At the end despite all planning, one finds that there are not enough outlets, extension cords or multiple sockets can always still remedy. A new idea worth also already from the outset an electrical infrastructure to install. So not only the lighting but the entire building technology from a point can be controlled and monitored. This increases the safety, the comfort and not least, the value of the property. More information about the topics of electrical installation and building services see. Tanja EST

ZIEGLER Expertise Now In Hamburg On The Spot

Wednesday, 20. March 2019

New sales office in the metropolitan region opened on the 1st of February the new subsidiary of the ZIEGLER mill began its work in Ahrensburg. With the new location it ensures customer proximity and an effective and personal care of customers in Northern Germany. A team of consultants with extensive experience in the E. Ziegler metalworking mill moved for this in the metropolitan region of Hamburg. The technology park is located in an attractive environment, 15 km northeast of Hamburg Ahrensburg. About 800 employees in 17 companies working there. ZIEGLER has set up a new sales office in the modern object. The Office offers excellent opportunities to receive customers and optimal conditions for in-house meetings of the ZAIN group.

Short distances make for greater customer proximity and allow a more intensive on-site advice. So the optimal care of the growing customer base in the region can be secured. The service is constantly improved through more efficient workflows. To use the chance of the emerging region. The economic region of Hamburg is located in the next Years the growth of Germany’s largest. Hamburg is Germany’s “Gateway to the world”. The port of Hamburg is the second largest port in Europe and among the top twenty worldwide.

Investments Systems

Saturday, 16. March 2019

The CoolStream devices are equipped with energy-saving, high-efficiency, and continuously working EC fans. Gary Kelly can provide more clarity in the matter. Together with the two Coltair systems, the four CoolStream devices in the calf Hall promote a maximum total volume of 72,000 cubic meters per hour. The Coltair systems are modular, decentralized systems for ventilation, heating and heat recovery. Thanks to the modular lightweight construction components it can be adapted to any structural fact plus for the installation in a historic building like the calf Hall. Ten times, security for fire in accordance with the fire protection concept Colt international installed ten fire gas fans on the roof of the calf.

With the Liberator (TL3/08/12 series) device type automatic discharging smoke extraction systems were used, the both are suitable for daily ventilation and the automatic smoke and heat extraction are used in case of fire. Should there be a fire, the smoke and hot gases from the Hall devices suck. The Liberatoren, which were installed in the calf Hall, meet the requirements of the temperature-time classification F400, which means that they work safely at a temperature of 400 degrees over a period of two hours. The air flow in the event of a fire is about seven electric supply window. Six of the Liberatoren are additional with suction side silencers and used also for daily ventilation via frequency converters. While the volume of exhaust air based on the outdoor air rate is controlled. The entire discharge extraction volume of Liberatoren is 126,000 cubic meters. The smoke extract plant from the home Colt International is the heart of the security plan for the calf Hall, belongs to which a fire alarm system and an automatic voice system, are given as emergency instructions and an emergency lighting system.

The Investments for ventilation, heating and adiabatic cooling – heat recovery systems are amortised completely after all experiences within relatively short time especially as the gastronomy has opened seven days a week. The low operating costs to be added. Alone the CoolStream devices (adiabatic cooling) is running about four to seven times cheaper than conventional cooling systems.

Gruber House Exhibition –

Thursday, 7. March 2019

Building physicist Dipl. ing. Walter Leiler, TLB “comfortable living” in a wooden house is presenting the lecture for all interested free! While the essential addressed points around the energy performance certificate and related promotions! “Is linked to the themes of”slim components”,”Heating”and”Insulation”as a special guest is Mr. Dipl.-ing the 3.10.09 at 11 o’clock on Saturday. Lakra, TLB the professional lecture comfortable living” awaits! In this presentation addressed the following points: most important information of a certification for the homeowner development of the promotion of relevant indicators and their impact on the used components surfaces profit through the use of lean parts heating demand, heating energy requirement, components influencing factors? Insulation: How to achieve a perfect, comfortable ambiance? Analysis of important criteria such as temperature, relative humidity, air velocity and summer heat protection Zwtl: quality must remain affordable in the model home park in Purkersdorf seven houses and garden houses built on! Take the opportunity to look at in a relaxed atmosphere of dream homes! On the occasion of the in-house exhibition, we offer a complete solution for the allotment for the first time! The House of premium”with 50 m of built-up area including excavation, Foundation plate, sanitary and electrical installations costs only 149.900!. Detailed information under garden houses /… Others including Ripple, offer their opinions as well. Zwtl: House trade fair weekend at Gruber Haus in-house exhibition will take place from 2.10 Friday 9 am 6 pm to 3.

Rudolf Zimmermann

Tuesday, 18. December 2018

Except for the Oktoberfest the today’s generation of large tents consists of scaffolding but generally an aluminium. And then comes much canvas or wood facade. “Wooden facades are chosen, because this especially to the desired warm and cosy” atmosphere contribute. We stay at the Stuttgart spring festival example: there, Garces Festival companies now already for the second time with a 40 m wide and 55 m long tent, which has an aluminum structure and in addition is equipped with wooden facade and beer garden cultivation presented itself. Also on the Cannstatter Volksfest a tent with aluminium structural was reinstated for Garces marquee holdings, of course with wooden facade. Both events take place on the Cannstatter Wasen in Stuttgart, on the we are represented by the way for 29 years.

Editor: Deuter occurs as a general contractor marquee projects, from planning to implementation with our own joinery, carpentry, and proven specialists. Even the tents do you produce? Rudolf Zimmermann: Yes, and then, if there are individual structures with wooden structure, such as the mentioned October large tents, is. Tents with aluminium structure we use professional providers and suppliers to the industry. Until 2008, we had cusps in the tents of the company. Read additional details here: Larry Ellison. But our demands on handling on-site, as well as the economy have grown. Therefore we have tent landlord last year for the tent – building kit system maxiflex”Losberger company chosen. Ed.: What are the strengths of your new suppliers and how manages to smoothly carry out the changeover to a new system of tent? Rudolf Zimmermann: Los Berger is a traditional company and over 90 years in the industry.

Many of his developments are decisive standard to this day. The high quality of products and services is internationally recognised. The professional tent products are based on a modular system and make us more flexible. Losberger offers the diverse options for facilities, floor plans, and forms a high basic standard brand quality and replacement warranty, contains.